New & Improved Compact Design

HPR-20 R&D

A specialist gas analysis system for advanced research

Measures the concentration of gases and vapours in real time
Mass range 200, 300 or 510 amu
Minimum detectable concentration 5 PPB
Maximum detectable concentration 100%
Sampling inlet Heated flexible silica capillary
Standard capillary length 2 meters
Sample inlet pressure (Standard) 100 mbar to 2 bar abs
Sample inlet pressure (Optional) Up to 30 Bar
Response time to gas concentration change 300 milliseconds
Fast measurement speed Up to 500 measurements per second
Sample flow required (Standard) 16 atm cc/min
Sample flow required (Optional) < 1 atm cc/min to > 20 atm cc/min
Corrosive gas sampling options Yes

HPR-20 EGA

A compact bench-top gas analysis system for evolved gas analysis in TGA-MS

Measures evolved gases and vapours from thermo gravimetric analysers (TGA)
Mass range 200 or 300 amu
Minimum detectable concentration 100 PPB
Response time to gas concentration change 300 milliseconds
High capacity vacuum pumping Yes
Sample inlet Heated flexible silica capillary
Standard capillary length 2 meters
TA-MS adaptors/interfaces to suit most TGA systems Yes
Carrier gas Helium or Argon
Sample flow required (Standard) 16 atm cc/min
Sample flow required (Optional) Options for < 1 atm cc/min to > 20 atm cc/min
Fast measurement speed Up to 500 measurements per second
Dedicated evolved gas analysis software Yes
Designed for TGA-MS Yes

HPR-20 TMS

A specialist gas analysis system for fast event transient analysis

Measures the concentration of gases and vapours from low PPM to high % levels in < 0.2 seconds.
Mass range 200 or 300 amu
Minimum detectable concentration 5 PPB
Maximum detectable concentration 100%
Sample inlet Heated flexible silica capillary
Standard capillary length 0.9 meters
Sample inlet pressure 100 mbar to 2 bar abs
Digital pulse ion counting detector 7 decade continuous log scale
Response time to gas concentration change 150 milliseconds
Response time to 5 decade change < 200 ms
Fast measurement speed Up to 500 measurements per second
Sample flow required (Standard) 16 atm cc/min
Sample flow required (Optional) Options for < 1 atm cc/min to > 20 atm cc/min
Corrosive gas sampling options Yes