A specialist gas analysis system for advanced research
Measures the concentration of gases and vapours in real time
| Mass range | 200, 300 or 510 amu |
| Minimum detectable concentration | 5 PPB |
| Maximum detectable concentration | 100% |
| Sampling inlet | Heated flexible silica capillary |
| Standard capillary length | 2 meters |
| Sample inlet pressure (Standard) | 100 mbar to 2 bar abs |
| Sample inlet pressure (Optional) | Up to 30 Bar |
| Response time to gas concentration change | 300 milliseconds |
| Fast measurement speed | Up to 500 measurements per second |
| Sample flow required (Standard) | 16 atm cc/min |
| Sample flow required (Optional) | < 1 atm cc/min to > 20 atm cc/min |
| Corrosive gas sampling options | Yes |
A compact bench-top gas analysis system for evolved gas analysis in TGA-MS
Measures evolved gases and vapours from thermo gravimetric analysers (TGA)
| Mass range | 200 or 300 amu |
| Minimum detectable concentration | 100 PPB |
| Response time to gas concentration change | 300 milliseconds |
| High capacity vacuum pumping | Yes |
| Sample inlet | Heated flexible silica capillary |
| Standard capillary length | 2 meters |
| TA-MS adaptors/interfaces to suit most TGA systems | Yes |
| Carrier gas | Helium or Argon |
| Sample flow required (Standard) | 16 atm cc/min |
| Sample flow required (Optional) | Options for < 1 atm cc/min to > 20 atm cc/min |
| Fast measurement speed | Up to 500 measurements per second |
| Dedicated evolved gas analysis software | Yes |
| Designed for TGA-MS | Yes |
A specialist gas analysis system for fast event transient analysis
Measures the concentration of gases and vapours from low PPM to high % levels in < 0.2 seconds.
| Mass range | 200 or 300 amu |
| Minimum detectable concentration | 5 PPB |
| Maximum detectable concentration | 100% |
| Sample inlet | Heated flexible silica capillary |
| Standard capillary length | 0.9 meters |
| Sample inlet pressure | 100 mbar to 2 bar abs |
| Digital pulse ion counting detector | 7 decade continuous log scale |
| Response time to gas concentration change | 150 milliseconds |
| Response time to 5 decade change | < 200 ms |
| Fast measurement speed | Up to 500 measurements per second |
| Sample flow required (Standard) | 16 atm cc/min |
| Sample flow required (Optional) | Options for < 1 atm cc/min to > 20 atm cc/min |
| Corrosive gas sampling options | Yes |
